2.1. Electric generating plant based on TGS includes:
2.1.1. Turbo generator synchronous with excitation from permanent magnets, consisting of:
2.1.1.1. A rotor with permanent magnets;
2.1.1.2. Stator with voltage less than 1000 V with direct liquid cooling (TP-22C coolant is supplied from a single GPA oil system);
2.1.1.3. Slide bearings with a forced supply of lubricant (oil supply TP-22C is carried out from a single oil system GPA);
2.1.1.4. Rotor angle position sensor (Next DPR);
2.1.1.5. The rectifier is diode;
2.1.1.6. The rectifier control unit;
2.1.1.7. Unit with information signal processing system;
2.1.1.8. Box of conclusions;
2.1.1.9. One enclosure in explosion-proof design;
2.1.2. Power Inverter (Next Inverter);
2.1.3. The remote control;
2.1.4. Transformer;
2.1.5. Exit cell.
dust removal equipment water bath dedusting equipment
Features of electric furnace dust removal system:
1) Dust removal system equipment has strong reliability, not affecting the normal operation of smelting, easy for maintenance.
2) Gas flue capture mode belongs to the whole process of capturing.
3) Gas flue capture rate is more than 98 percent, can achieve plant roof, can not see smoke
4) Dust collection efficiency is more than 99 percent
5) Dust concentration in the workshop is less than 10mg/m3.
6) Low cost for long-term operating , stable efficiency
7) The wind engine noise is less than 80dB.
8) The flue has no dust fouling phenomenon
9) Dust collecting volume is more than 12Kg / t steel