1.2080 Die Mould Steel Bar Cold Work Tool Steel Working Die Steel

Model NO.
Round bar
Composition
Stainless Steel Scrap
Technique
Cold Rolled
Shape
Bar
Surface Treatment
Black
Special Use
High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
Application
Die Steel Bar
Transport Package
Wooden
Specification
6-400mm
Trademark
Smooth
Origin
China
HS Code
7214100000
Reference Price
$ 810.00 - 900.00
Contact Us

Product Description

1.2080 Die Mould Steel Bar Cold Work Tool Steel Working Die Steel 1.2080 Die Mould Steel Bar Cold Work Tool Steel Working Die Steel 1.2080 Die Mould Steel Bar Cold Work Tool Steel Working Die Steel 1.2080 Die Mould Steel Bar Cold Work Tool Steel Working Die Steel 1.2080 Die Mould Steel Bar Cold Work Tool Steel Working Die Steel 1.2080 Die Mould Steel Bar Cold Work Tool Steel Working Die Steel 1.2080 Die Mould Steel Bar Cold Work Tool Steel Working Die Steel 1.2080 Die Mould Steel Bar Cold Work Tool Steel Working Die Steel 1.2080 Die Mould Steel Bar Cold Work Tool Steel Working Die Steel 1.2080 Die Mould Steel Bar Cold Work Tool Steel Working Die Steel 1.2080 Die Mould Steel Bar Cold Work Tool Steel Working Die Steel Designation by Standards
Mat. No. DIN EN AISI
1.2080 X210Cr12 - D3

Chemical Composition (in weight %)
C Si Mn Cr Mo Ni V W Others
2.05 0.25 0.30 11.50 - - - - -

Applications
Cutting tools, stamping, woodworking, drawing, deep drawing and pressing tools,
cold working rolls, measuring tools.

Physical properties (avarage values) at ambient temperature
Modulus of elasticity [10 3  x N/mm 2 ]:  210
Density [g/cm 3 ]:  7.67
Thermal conductivity [W/m.K]:  20.0
Electric resistivity [Ohm mm 2 /m]:  0.65
Specific heat capacity[J/g.K]:  0.46

Coefficient of Linear Thermal Expansion 10 -6   o C -1
20-100 o C 20-200 o C 20-300 o C 20-400 o C 20-500 o C 20-600 o C 20-700 o C
11.7 12.0 12.4 12.9 13.3 13.6 14.0

Soft Annealing
Heat to 800-840 o C, cool slowly. This will produce a maximum Brinell hardness of 250.
To secure uniform softness.

Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 650 o C,
holding for one hour at heat, followed by air cooling. This operation is performed to
reduce distortion during heat treatment.

Hardening
Harden from a temperature of 940-980 o C followed by oil quenching or warm bath approx. 400 o C.
Hardness after quenching is 64-66 HRC. For small parts up to thickness 30 mm.
Harden from a temperature of 960-100 o C followed by air, comompressed air quenching.
Hardness after quenching is 63-65 HRC.

Tempering
Tempering temperature:  150-400 o C.
Tempering Temperature ( o C) vs. Hardness (HRC)
100 o C 200 o C 300 o C 400 o C 500 o C 600 o C
64 62 60 57 53 42

Forging
Hot forming temperature:  1050-850 o C.

Machinability
The machinability rating of D3 is roughly 25% that of free machining carbon steel 1018.
Due to its abrasion resistant nature, machining in the hardened condition should
be limited to finish grinding.

Disclaimer
The information and data presented herein are typical or average values and are not
a guarantee of maximum or minimum values. Applications specifically suggested for
material described herein are made solely for the purpose of illustration to enable the reader to
make his own evaluation and are not intended as warranties, either express or implied,
of fitness for these or other purposes. There is no representation that the recipient of this literature
will receive updated editions as the become available.

Leave Your Message

 

Alloy Steel
✉ Contact Supplier