Cpm4V Material Powder Metallurgy Tool Steel Black Surface Forging Steel Hot Rolled Steel Flat Bar Round Bar
Model NO.
powder tool steel
Composition
Stainless Steel Scrap
Technique
Forged
Shape
Bar
Surface Treatment
Polished
Special Use
High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
Application
Die Steel Bar
Length
2500-5500mm
Material
HSS
Usage
Gear Hob
Customized Support
OEM
Transport Package
N/M
Specification
6-400mm
Trademark
Smooth
Origin
China
HS Code
7226911000
Production Capacity
1000ton/Month
Reference Price
$ 37,260.00 - 41,400.00
Description
Product Description
Typical Composition
:
CPM 4V is a powder metal tool steel with an outstanding combination of properties including high impact toughness and very good wear resistance. CPM 4V should be considered for service in fine blanking, powder compaction tools, for processing high-strength low-alloy (HSLA) steels, advanced high-strength steels (AHSS) and applications where a combination of strength , wear resistance and toughness is required. CPM 4V should be considered for applications where a higher attainable hardness and additional abrasion resistance is required than can be offered by CPM 3V.
Chemical Composition:
Physical Properties
Density: 0.278 lb/in3 (7700 kg/m3)
Specific Heat: 0.11 Btu/lb/ºF (460 J/kg°C)
Modulus of Elasticity: 30x106 psi (207 GPa)
Machinability: 50-60% of a 1% carbon steel
HEAT TREATING INSTRUCTIONS
HARDENING:
Preheating: 1500-1550°F (816-845°C), equalize.
Austenitizing (High Heat): Heat rapidly from the preheat.
For Maximum Wear Resistance:
Furnace or Salt Bath: 2100°F (1149°C) Soak for 15 minutes at temperature
For Balanced Wear & Toughness:
Furnace or Salt Bath: 1875-1950°F (1024-1065°C) Soak for 30 minutes at temperature
For Maximum Toughness:
Furnace or Salt Bath: 1800°F (982°C) Soak for 30 minutes at temperature
Quenching:
Air, pressurized gas, warm oil, or salt. For pressurized gas, the furnace should have a minimum quench pressure of 4 bars. For oil, quench until black, about 900°F (482°C), then cool in still air to 150-125°F (66-51°C). For salt maintained at 1000-1100°F (538-593°C), equalize in the salt, then cool in still air to 150 125°F (66-51°C).
Tempering:
Temper immediately after quenching. Typical temperature range is 1000-1100°F (538 593°C). Do not temper below 1000°F (538°C). Hold at temperature for 1 hour per inch of thickness, 2 hours minimum, then air cool to ambient temperature. Double tempering is required.
ANNEALING:
Annealing must be performed after hot working and before rehardening. Heat at a rate not exceeding 400°F per hour (222°C per hour) to 1600-1650°F (871-899°C), and hold at temperature for 1 hour per inch of maximum thickness; 2 hours minimum. Then cool slowly with the furnace at a rate not exceeding 50°F per hour (28°C per hour) to 1000°F (649°C). Continue cooling to ambient temperature in the furnace or in air.
The resultant hardness should be approximately 241 HBW.
CPM 4V is a powder metal tool steel with an outstanding combination of properties including high impact toughness and very good wear resistance. CPM 4V should be considered for service in fine blanking, powder compaction tools, for processing high-strength low-alloy (HSLA) steels, advanced high-strength steels (AHSS) and applications where a combination of strength , wear resistance and toughness is required. CPM 4V should be considered for applications where a higher attainable hardness and additional abrasion resistance is required than can be offered by CPM 3V.
Chemical Composition:
| CPM 4V | C | Mn | Si | Cr | Mo | V |
| 1.35 | 0.40 | 0.80 | 5.00 | 2.95 | 3.85 |
Physical Properties
Density: 0.278 lb/in3 (7700 kg/m3)
Specific Heat: 0.11 Btu/lb/ºF (460 J/kg°C)
Modulus of Elasticity: 30x106 psi (207 GPa)
Machinability: 50-60% of a 1% carbon steel
HEAT TREATING INSTRUCTIONS
HARDENING:
Preheating: 1500-1550°F (816-845°C), equalize.
Austenitizing (High Heat): Heat rapidly from the preheat.
For Maximum Wear Resistance:
Furnace or Salt Bath: 2100°F (1149°C) Soak for 15 minutes at temperature
For Balanced Wear & Toughness:
Furnace or Salt Bath: 1875-1950°F (1024-1065°C) Soak for 30 minutes at temperature
For Maximum Toughness:
Furnace or Salt Bath: 1800°F (982°C) Soak for 30 minutes at temperature
Quenching:
Air, pressurized gas, warm oil, or salt. For pressurized gas, the furnace should have a minimum quench pressure of 4 bars. For oil, quench until black, about 900°F (482°C), then cool in still air to 150-125°F (66-51°C). For salt maintained at 1000-1100°F (538-593°C), equalize in the salt, then cool in still air to 150 125°F (66-51°C).
Tempering:
Temper immediately after quenching. Typical temperature range is 1000-1100°F (538 593°C). Do not temper below 1000°F (538°C). Hold at temperature for 1 hour per inch of thickness, 2 hours minimum, then air cool to ambient temperature. Double tempering is required.
ANNEALING:
Annealing must be performed after hot working and before rehardening. Heat at a rate not exceeding 400°F per hour (222°C per hour) to 1600-1650°F (871-899°C), and hold at temperature for 1 hour per inch of maximum thickness; 2 hours minimum. Then cool slowly with the furnace at a rate not exceeding 50°F per hour (28°C per hour) to 1000°F (649°C). Continue cooling to ambient temperature in the furnace or in air.
The resultant hardness should be approximately 241 HBW.
Alloy Steel
-
Superior, Flexible, High-Quality, Anti-Deformation Spiral Steel Pipe
ASTM4140, GB 42CrMo, JIS Scm440 Cold Drawn Cold Heading Steel Steel Bar
Wholesale Stainless Steel Round Bar
Pressure-Resistant, Wear-Resistant, Efficient, Durable Plastic-Coated Pipes Used in Coal Mine Drainage
Precision Alloy 2j09 2j10 Steel Strip Corrosion Resistant Factory Direct Sales
Seamless Steel Pipe 42CrMo4 42CrMo4qt 41cr4n 41cr4a
High Pressure Boiler Seamless Steel Tubes ASTM A213 T2 T11 T12 T22
Cold Drawn Precision Seamless Pipe 42CrMo 4140 Alloy Pipe
Hot Rolled Steel Pipes En 10225 S355nl0 S355g7 S355g9 +N
Monel 400/K500 Copper Nickel Alloy Strip/Coil/Pipe/Tube/Round Bar/Rod/Plate/Sheet Monel
Monel Alloy Ncu28-2.5-1.5 Monel 500 Nickel Alloy Plate/Sheet Long and Wide Custom
Superalloy Gh4137 Sg37A Gh141 Steel Strip for High-Performance Applications
Heavy-DIP Galvanized Steel Coil (Z275) - S350gd+Z Ultra-Thick Coating for Extreme Marine Environments 5000+ Hours Salt Spray Resistance A653
Boiler and Heat Exchanger Steel Pipes X20crmov12-1 14MOV63 10crmo910
En10305-1 C45e C35e E255 Cold Drawn Seamless Steel Tubes
Seamless Steel Pipes En10210-1 En10297-1 En10216-1