1050 Anodized Aluminum Aluminium Disc Cap

Model NO.
1100/1050/1060/1070/3003/5005/5052/5657
Application
Door & Window, Heat Sink, Utensils, Caps, Printing Plates
Certification
ISO9001, ASTM
Surface Treatment
Oxidized
Alloy
Alloy
Grade
Any
Color
Any
Temper
F/H14
Technique
Hot Rolled/Cast Rolled
Transport Package
Export Standard Wooden Pallet
Specification
According to Customer Requirement
Trademark
Chalco Aluminum
Origin
Henan China
HS Code
7606125900
Production Capacity
25000mt/Month
Reference Price
Please contact us for quote
Contact Us

Product Description

1050 aluminum circle is one of pure aluminum series product, the aluminum content of qualified products must reach more than 99.5% . Because it does not contain other technical elements, so the production process is relatively simple, the price is relatively cheap, is the most commonly used series in conventional industry. Industrial pure aluminum circle series has a good thermal conductivity ,high plasticity, corrosion resistance,etc characteristics.

And anodising is an electrolytic process that produces a dense, chemically stable protective aluminum oxide film that is an integral part of the underlying aluminum---it cannot peel or flake off. Most films produced by anodising are translucent and so show the silvery look of the aluminum but various colours are achievable by a varity of anodising process variations. The main type of anodising process used for general purpose is based on a sulphuric acid electrolyte, producing an ideal combination of decorative and protective properites. The sealing of the anodic film in boiling water after anodising is an important part of the surface treatment.
  Anodising enhances the natural qualities of aluminum still further; it permits a strongly contemporary finish with incomparable corrosion and abrasion resistance.

The advantages of Chalco  1050 Anodised aluminum circle
•  Top-grade quality. Refined, luxurious and sparky surface
•  Unique finish
•  Low proportion, only 1/3 of stainless steel weight and easy for further fabrication
•  Sapphire grade surface hardness for scratching resistance
•  Environmental friendly material
•  The oxidizing layer will not crach, peel off or flake
•  Multiple colours can provide unlimited possibilities for device design
•  Simplified flow, high yield productivity, cost saving
•  High reflectance,improve the lamp light reflectivity

Chemical Properties - 1050 Anodised aluminum circle
Alloy Designation Si Fe Cu Mn Mg Cr Ni Zn Ti Ga V Remarks Others Aluminium
min
Numerical Chemical Sympols Each Total
EN AW
-1050A 		EN AW-
AI 99.5 		0.24 0.40 0.05 0.05 0.05 - - 0.07 0.05 - - - 0.03 - 99.50
 
Specification-1050 Anodised aluminum circle
Alloy Temper Thickness
(mm) 		Diameter(mm) Main Usage
1050DC O 0.7-6.0 120-900 cookware lampshade
Mechanical properties are in complicance with EN485-2 standard

1050 Anodized Aluminum Aluminium Disc Cap
1050 Anodized Aluminum Aluminium Disc Cap

 

Leave Your Message

 

Aluminum Alloy Sheet
✉ Contact Supplier